Flame-Resistant Clothing
Flame-resistant workwear references produced to order. Protective performance and any standards depend on the specified fabric and construction and are confirmed on a per-project basis.
WW-1243FR Long-Sleeve Crew-Neck T-Shirt, 7 oz
Long-sleeve flame-resistant t-shirt cut from 7 oz 100% cotton interlock. Segmented silver retroreflective marking is applied by heat transfer rather than sewn tape. Buttons are FR-rated plastic, and the garment carries a meta-aramid FR heat label.
View reference →
WW-1244FR Zip-Front Vest
A flame-resistant vest in 7 oz 100% cotton twill. The front closes with a No.5 plastic FR zipper. Silver retroreflective tape (CSR-5001) is applied for low-light visibility, and labeling is meta-aramid FR stock.
View reference →
WW-1245FR Reflective Zip Sweatshirt
Zip-front FR sweatshirt produced in 12 oz 100% cotton interlock, or in a 12 oz 95% cotton / 5% elastane knit where stretch is wanted. It closes with a No.5 metal FR zipper and carries silver retroreflective tape (CSR 5002-B).
View reference →
WW-1246FR Ripstop Work Shirt
Flame-resistant work shirt in a 7 oz ripstop weave of 88% cotton / 12% nylon. The button front uses 20L FR plastic buttons. Silver retroreflective tape (CSR-5001-B) is applied to the garment.
View reference →
WW-1247FR Denim Work Pants
Work pants made from 13 oz 100% cotton denim twill with a flame-resistant build. Silver retroreflective tape (CSR-5001-B) is applied to the legs' shell fabric. Labels are meta-aramid FR stock with a sewn-in Dupont-printed panel.
View reference →
WW-1248FR Cotton-Nylon Work Pants
These FR work pants are sewn from 9 oz cotton-nylon twill (88/12) with 5 oz 100% cotton pocketing. Hardware is FR-rated: a No.3 metal zipper and 24L plastic buttons. Silver retroreflective tape (CSR-5001) is applied to the shell.
View reference →
WW-1249FR Hooded Long-Sleeve T-Shirt
A hooded long-sleeve t-shirt in flame-resistant 6 oz 100% cotton interlock. The knit is light enough for base-layer wear. Labeling is meta-aramid FR stock with a sewn-in Dupont-printed panel.
View reference →
WW-1250FR Canvas Jacket
Flame-resistant jacket in 10 oz canvas, an 87% cotton / 12% nylon / 1% spandex blend with a small amount of stretch. The front closes with a No.5 metal FR zipper. Labels are meta-aramid FR stock.
View reference →
WW-1251FR Hooded Sweatshirt
Heavyweight FR hoodie in 12 oz 100% cotton interlock. Silver retroreflective tape (CSR 5002-B) is applied to the shell for low-light visibility. The FR heat label is 100% meta-aramid.
View reference →
WW-1252FR Reflective Work Shirt
Button-front FR shirt in 7 oz 100% cotton twill. Silver retroreflective tape (CSR-5001) is applied to the shell. Buttons are 20L FR-rated plastic, and the label set is meta-aramid FR stock.
View reference →
WW-1253FR Button-Front Work Shirt
A plain-front FR work shirt sewn from 7 oz 100% cotton twill and closed with 20L FR plastic buttons. Silver retroreflective tape (CSR-5001-B) is applied to the garment. Labeling is meta-aramid FR stock with a sewn-in Dupont-printed panel.
View reference →
WW-1254FR Twill Work Pants
FR pants in 9 oz cotton-nylon twill (88/12), lined at the pockets with 5 oz 100% cotton. Closure hardware is a No.5 metal FR zipper with 24L FR plastic buttons. The shell carries CSR-5001 silver retroreflective tape.
View reference →
WW-1255FR Twill Work Suit
One-piece FR work suit in 9 oz 88% cotton / 12% nylon twill with 5 oz cotton pocketing. It closes with a No.5 metal FR zipper backed by 24L FR plastic buttons. Silver retroreflective tape (CSR-5001) is applied to the shell fabric.
View reference →
WW-1256FR Short-Sleeve Crew-Neck T-Shirt
Short-sleeve crew-neck t-shirt in flame-resistant 6 oz 100% cotton interlock. A simple knit garment with no hardware. The FR heat label is 100% meta-aramid, with a Dupont-printed panel sewn in on four sides.
View reference →
WW-1257FR Cotton-Nylon Work Shirt
Work shirt in 7 oz twill, an 88% cotton / 12% nylon blend, built as flame-resistant clothing. The front placket uses 20L FR plastic buttons. There is no reflective trim on this model.
View reference →
WW-1258FR Cotton Bib
Flame-resistant bib made from 6 oz 100% cotton interlock. Construction is plain knit with no hardware. Labeling is meta-aramid FR stock with a sewn-in Dupont-printed panel.
View reference →
WW-1259FR Zip-Front Sweatshirt
A zip-front sweatshirt in 12 oz flame-resistant 100% cotton interlock. The No.5 metal FR zipper is the only hardware; this model has no reflective trim. The FR heat label is 100% meta-aramid.
View reference →
WW-1260FR Reflective Short-Sleeve T-Shirt
Short-sleeve crew-neck FR t-shirt in 6 oz 100% cotton interlock. Segmented silver retroreflective marking (CSR-4003FR-Z) is applied by heat transfer, keeping the knit flexible. Labeling is meta-aramid FR stock.
View reference →
WW-1261FR Twill Reflective Pants
FR pants cut from 9 oz cotton-nylon twill with 5 oz 100% cotton pocket bags. Hardware is a No.3 metal FR zipper and 24L FR plastic buttons. CSR-5001 silver retroreflective tape is applied to the shell.
View reference →
WW-1262FR Cross-Back Coverall
Cross-back FR coverall in 9 oz 88% cotton / 12% nylon twill, with pockets lined in 5 oz 100% cotton. It closes on a No.8 metal FR zipper with 24L FR plastic buttons. Silver retroreflective tape (CSR 5002-B) is applied to the shell.
View reference →
WW-1263FR Stretch Twill Work Pants
Flame-resistant work pants cut from 10.5 oz twill in 98% cotton with 2% spandex for stretch. Trims are FR-rated: a No.5 metal FR zipper and 24L FR plastic buttons, with 100% meta-aramid used in construction. Pocket bags are 5 oz 100% cotton, and CSR-5001 silver retroreflective tape is applied to the garment.
View reference →
WW-1264FR Bib Overall
A bib overall for flame-resistant programs, made from 6 oz 100% cotton interlock knit. Construction uses 100% meta-aramid. Labels, including a printed DuPont label, are sewn to the shell fabric rather than glued.
View reference →
WW-1265Reflective FR Stretch Twill Suit
An FR suit in 10.5 oz twill, 98% cotton blended with 2% spandex for a small amount of stretch. It has a No.8 metal FR zipper and 24L FR plastic buttons, with pocket bags cut from 5 oz 100% cotton. CSR-5001 silver retroreflective tape is applied, and 100% meta-aramid is used in construction.
View reference →
WW-1266FR Long-Sleeve Crew-Neck T-Shirt, 6 oz
Long-sleeve crew-neck tee in 6 oz 100% cotton interlock for FR programs. Segmented silver retroreflective heat transfers (CSR-4003FR-Z) are applied to the knit. Construction uses 100% meta-aramid, and labels are sewn to the shell fabric.
View reference →
WW-1267FR Twill Coverall, Plastic Zip
This coverall is sewn from 9.0 oz twill in an 88% cotton / 12% nylon blend. Closure hardware is FR-rated: a No.8 plastic FR zipper and 24L FR plastic buttons. Pocket bags are 5 oz 100% cotton, and 100% meta-aramid is used in construction.
View reference →
WW-1268FR Canvas Work Vest
Work vest in 10 oz canvas, an 87% cotton / 12% nylon / 1% spandex blend. Hardware is FR-rated, with No.5 and No.3 metal FR zippers and 24L FR plastic buttons. Construction uses 100% meta-aramid, and labels are sewn to the shell fabric.
View reference →
WW-1269FR Twill Coverall, Metal Zip
A flame-resistant coverall in 9.0 oz twill, 88% cotton / 12% nylon. The front closes with a No.8 metal FR zipper. Pocket bags are cut from 5 oz 100% cotton, CSR-5002-A trim is applied, and 100% meta-aramid is used in construction.
View reference →
WW-1270Reflective FR Cotton-Nylon Suit
FR suit built on a 9.0 oz twill shell, 88% cotton / 12% nylon. CSR-5001 silver retroreflective tape is applied to the garment. It closes with a No.8 metal FR zipper backed by 24L FR plastic buttons, and pocket bags are 5 oz 100% cotton. Construction uses 100% meta-aramid.
View reference →
WW-1271FR Knit Bib Overall
Bib overall cut from 6 oz 100% cotton interlock, a knit shell for FR wear. 100% meta-aramid is used in construction. The printed DuPont label and other labels are sewn to the shell fabric.
View reference →
WW-1272Reflective FR Antistatic Coverall
This coverall pairs a 7.7 oz twill shell, 99% cotton with 1% antistatic fiber, with CSR-5001 silver retroreflective tape. It has No.8 and No.5 metal FR zippers and 24L FR plastic buttons. Pocket bags are 5 oz 100% cotton, and 100% meta-aramid is used in construction.
View reference →
WW-1273Reflective FR Twill Work Suit
A work suit in 9.0 oz twill, 88% cotton / 12% nylon, carrying CSR-5001 silver retroreflective tape. Hardware is a No.5 metal FR zipper with 24L FR plastic buttons. Pocket bags are 5 oz 100% cotton; construction uses 100% meta-aramid.
View reference →Request a quote for flame-resistant clothing
Send the models, quantities, colours, branding and any standard you need. We return references and a quotation on your timeline.