Safety Vests
Made-to-order hi-vis safety vests with reflective tape, from zip and hook-and-loop fronts to multi-pocket surveyor styles. Each is a manufacturing reference produced in your choice of colour, fabric weight and branding.
WW-1001Six-Stripe Hi-Vis Zip Vest
A hi-vis vest in breathable 100% polyester tricot with a zip front. Six 2-inch reflective strips run across the abdomen, shoulders, and sleeve areas. Built for EN ISO 20471 compliance and sized S through 5XL for site crews, traffic management, and emergency response teams.
View reference →
WW-1002Recycled Polyester Hi-Vis Vest
Made from 100% recycled polyester, this vest carries 5 cm reflective strips and closes with a hook-and-loop front. The source garment is certified to EN ISO 20471:2013+A1:2016. Sizing runs from S to 6XL, which covers night operations, roadside work, and rescue crews across a wide range of body types.
View reference →
WW-1003Neon-Trim Hi-Vis Vest
Four 2-inch reflective strips with neon trims give this 100% polyester vest 360-degree visibility. The front closes with hook-and-loop tape for fast on and off. It is a common choice for traffic management, road construction, emergency services, airport ground staff, and railway workers, and is built for EN ISO 20471 compliance.
View reference →
WW-1004Poly-Cotton Multi-Pocket Hi-Vis Vest
This vest is cut from an 80% polyester, 20% cotton twill that wears harder than plain knit and stays comfortable through a shift. Four 2-inch reflective strips on the shoulders and chest give 360-degree visibility. Multiple pockets hold phones, pens, small tools, flashlights, and work IDs. It closes with a zip front and is built for EN ISO 20471 compliance.
View reference →
WW-1005Class 3 Multi-Pocket Hi-Vis Jacket
A Class 3 hi-vis garment in lightweight polyester tricot with maximum reflective coverage for full-body visibility. The pocket layout is practical: a phone pocket with hook-and-loop flap, pen and pencil pockets, two large flap pockets, and a transparent ID pouch. A zip front closes it. Typical placements include highway construction, night traffic management, airport ground operations, and rail maintenance; the design is built for EN ISO 20471 compliance.
View reference →
WW-1006Segmented-Tape Hi-Vis Vest
Instead of solid stripes, this vest uses 2-inch segmented reflective tape in a diagonal layout that the eye picks up more readily on a moving wearer in low light. The tricot body is lightweight and machine washable. Storage includes a right chest pocket with transparent ID holder and phone slot, a flapped left chest pocket, and a vertical zip pocket. Built for EN ISO 20471 compliance.
View reference →
WW-1007Snap-Front Hi-Vis Vest
A quick-release vest for work where the garment has to come off fast. Snap fasteners close the front, and three 2-inch reflective strips give 360-degree coverage. The body is lightweight 100% polyester tricot, machine washable in cold water, and the design is built for EN ISO 20471 compliance.
View reference →
WW-1008Mesh Multi-Pocket Hi-Vis Vest
Breathable polyester mesh makes this vest suited to warm conditions and long wear. Four 2-inch reflective strips provide 360-degree visibility. The front carries a right chest ID pocket, a flapped left chest pocket, and a pen pocket, with two flapped pockets below; a zip closes the front. Built for EN ISO 20471 compliance.
View reference →
WW-1009Hi-Vis Short-Sleeve Zip Shirt
A short-sleeve reflective shirt in 100% polyester tricot with a zip front. The 2-inch reflective tape gives 360-degree visibility in low light. It suits crews who need hi-vis coverage with more comfort than a layered vest: construction, traffic management, warehouse logistics, and airport ground staff. Built for EN ISO 20471 compliance.
View reference →
WW-1010Neon-Accent Hi-Vis Vest
This 100% polyester vest carries four 2-inch reflective strips with neon accents for 360-degree visibility. Hook-and-loop tape closes the front. Lightweight and easy to maintain, it is intended for night operations, busy road sections, and rescue work, and is built for EN ISO 20471 compliance.
View reference →
WW-1011Hook-and-Loop Hi-Vis Vest
A straightforward site vest in high-strength 100% polyester tricot. The 2-inch reflective strips wrap the garment for 360-degree reflectivity, and the hook-and-loop front makes it quick to put on over workwear. Built for EN ISO 20471 compliance and commonly issued to construction, municipal, and airport crews.
View reference →
WW-1012Fluorescent-Trim Hi-Vis Vest
Four 2-inch reflective strips outlined with fluorescent trims cover the shoulders, chest, and lower body of this vest. The 100% polyester tricot is quick-drying and holds up to repeated washing. A hook-and-loop front keeps donning simple. Built for EN ISO 20471 compliance across road, utility, warehouse, and construction settings.
View reference →
WW-1013Three-Stripe Hi-Vis Vest
Three 2-inch reflective strips give this high-strength polyester vest 360-degree visibility. The front closes with hook-and-loop tape. It washes easily and is used by traffic control, road construction, railway, and airport personnel. Built for EN ISO 20471 compliance.
View reference →
WW-1014Eight-Stripe Hi-Vis Vest
With eight 2-inch reflective tapes across the chest, shoulders, and sleeve areas, this tricot garment has 360-degree visibility with no blind spots in low light. The fabric is durable, breathable 100% polyester tricot, and the front closes with hook-and-loop tape. Built for EN ISO 20471 compliance for construction, traffic, and rescue duties.
View reference →
WW-1015Four-Stripe Hi-Vis Vest
Four 2-inch reflective strips sit across both shoulders, the chest, and the abdomen, so the wearer stays visible from every angle. The body is breathable, machine-washable 100% polyester tricot with a hook-and-loop front. Built for EN ISO 20471 compliance and suited to traffic management, emergency services, construction, and event security.
View reference →
WW-1016Hi-Vis Work Vest
A durable tricot vest with four reflective strips arranged for 360-degree visibility with no blind spots. The hook-and-loop front opens and closes in one motion. Built for EN ISO 20471 compliance, it is issued to traffic controllers, road crews, emergency responders, and industrial and construction workers.
View reference →
WW-1017D-Ring Front Hi-Vis Vest
The front of this vest closes with a D-ring and webbing, a simple fastening that suits jobs where the vest goes on and off often. Four 2-inch reflective strips at the waist and shoulders cover the wearer through 360 degrees. Abrasion-resistant polyester tricot forms the body. Built for EN ISO 20471 compliance.
View reference →
WW-1018Hi-Vis Surveyor Vest
A surveyor-style vest in neon polyester tricot with 2-inch reflective strips for 360-degree visibility. Front storage includes a transparent ID pocket, a pen pocket, and two flapped lower pockets, and the vest closes with a zip. It is used by construction workers, surveyors, security personnel, cyclists, and volunteers. Built for EN ISO 20471 compliance.
View reference →
WW-1019Multi-Pocket Hi-Vis Zip Vest
Four 2-inch reflective strips handle low-light visibility while the pocket layout does the carrying: two large flapped front pockets, a phone pocket with hook-and-loop flap, and dedicated pen and pencil slots. The body is lightweight, machine-washable polyester tricot with a zip front. Built for EN ISO 20471 compliance for construction, logistics, security patrol, and airport ground services.
View reference →
WW-1020Two-Tone Hi-Vis Mesh Vest
An open polyester mesh vest with three strips of two-tone reflective tape wrapped 360 degrees around the body. The mesh keeps airflow high in warm conditions, and hook-and-loop tape closes the front. The source garment is certified to ANSI/ISEA 107 and is used on construction sites, in traffic management, at public events, and in warehouse and airport work.
View reference →
WW-1021Fluorescent-Trim Mesh Safety Vest
A 100% polyester mesh vest that stays light and breathable through long shifts. Three 2-inch reflective strips with fluorescent edges wrap the torso. Storage runs to expandable utility pockets, side hand-insert pockets, and a pen pocket. Certified to ANSI/ISEA107.
View reference →
WW-1022Incident Command Vest
A royal blue command vest for roles that need visibility without ANSI certification. The solid polyester body carries two 1-inch white gloss reflective tapes for 360-degree coverage in low light. Clear ID pockets on the front and back hold credentials, backed by an external upper pocket and an internal lower pocket. Hook-and-loop front closure.
View reference →
WW-1023Class 2 Surveyor Vest, Four-Pocket
An orange surveyor vest in lightweight, quick-dry 100% polyester. It meets Class 2 requirements under ANSI/ISEA107-2020, with 360-degree reflective coverage for low-light work. Four pockets take a phone, ruler, paperwork, and an ID holder. The front zipper makes it fast on and off over other layers.
View reference →
WW-1024Two-Tone Mesh Vest, Black Bottom
Breathable 100% polyester mesh with four 2-inch reflective tapes for 360-degree visibility day and night. Two flap chest pockets hold notebooks, pens, and small accessories. Closes with a front zipper. Certified to ANSI/ISEA107.
View reference →
WW-1025Class 3 Two-Tone Surveyor Vest
A Class 3 surveyor vest with a solid polyester front and mesh back and sleeves. Five runs of two-tone reflective tape meet ANSI/ISEA107-2020. The pocket layout is set up for radio users: a radio chest pocket, two reinforced mic tabs, a second chest pocket, a lower external flap pocket, and two internal lower pockets. Zip front closure.
View reference →
WW-1026Five-Pocket Two-Tone Mesh Vest
Polyester mesh keeps this vest cool during outdoor work. Reflective strips 5 cm wide cross the front and back for day and night visibility. Four large lower front pockets close with hook-and-loop flaps, and an expanding chest pocket adds capacity. Certified to ANSI/ISEA107, with a zip front.
View reference →
WW-1027Dual-Layer Hi-Vis Vest, PVA Lining
A two-layer vest: the outer shell is 100% polyester tricot, the inner layer PVA. The tricot outer is durable and breathable, while the PVA lining absorbs moisture and has a cooling effect on the wearer. Three 2-inch reflective strips wrap the full 360 degrees. Hook-and-loop front closure; certified to ANSI/ISEA107.
View reference →
WW-1028Mesh Safety Vest, No Pockets
A stripped-back vest: 100% polyester mesh body, 2-inch silver reflective stripes, zip front, and no pockets. Certified to ANSI/ISEA107-2020. Common issue choice for airports, construction crews, flaggers, railroad workers, and security staff.
View reference →
WW-1029Four-Pocket Mesh Safety Vest
Lightweight, quick-drying 100% polyester mesh with 360-degree reflective striping. A chest pocket fits a mobile phone, a pen pocket sits beside it, and two front flap pockets take a flashlight or similar hand tools. The front zipper keeps it quick on and off. Certified to ANSI/ISEA107-2020.
View reference →
WW-1030Four-Stripe Mesh Safety Vest
Four 2-inch reflective strips with extended fluorescent accents give this vest 360-degree visibility. The body is 100% polyester mesh. A pen pocket, a clear ID pocket, and two flap pockets cover everyday carry on site. Zip front; certified to ANSI/ISEA107-2020.
View reference →
WW-1031Mesh Vest, Dual-Color Tape
Three 2-inch dual-color reflective tapes, spaced in neon and silver, wrap this vest for 360-degree visibility in varied low-light conditions. The 100% polyester mesh body is quick-drying and easy to clean. Four pockets: a clear ID pocket on the right chest, a pen pocket on the left, and two lower cargo pockets. Front zipper; certified to ANSI/ISEA107-2020.
View reference →
WW-1032Two-Pocket Surveyor Vest, Mesh Back
A surveyor-style vest with a polyester tricot front and polyester mesh back, a combination that breathes well over long work hours. Its reflective strips run orange on both sides with silver through the middle. On the chest: a flap pocket at right, a pen pocket at left. Zip closure; certified to ANSI/ISEA107-2020.
View reference →
WW-1033Multi-Pocket Hi-Vis Work Vest
Reflective 2-inch strips at the shoulders, waist, and back give this 100% polyester vest 360-degree coverage in daylight, low light, and darkness. The front pocket set is organized for daily use: a PVC clear ID pocket, a pocket for a phone or small flashlight, two large utility pockets, and slip-in pockets. Machine washable, with a zip front. Certified to ANSI/ISEA107-2020.
View reference →
WW-1034Five-Point Breakaway Mesh Vest
A breakaway vest in polyester mesh that holds its color and cleans easily. Four 2-inch silver reflective strips give 360-degree coverage in low light. A left breast pocket and two lower pockets carry small tools and paperwork. The front closes with hook-and-loop. Certified to ANSI/ISEA107-2020.
View reference →
WW-1035Fluorescent Orange Mesh Tank Vest
A tank-style mesh vest in lightweight 100% polyester jersey, fluorescent orange. Reflective 2-inch strips run both vertically and horizontally across the body. It has a single pocket and a hook-and-loop front closure. Certified to ANSI/ISEA107, it suits cyclists and commuters as well as construction and security crews.
View reference →
WW-1036Color-Block Public Safety Vest
Made for emergency responders and law enforcement working in roadway and off-road environments. High-contrast color blocking pairs a breathable polyester mesh top with a durable solid bottom, and multiple spaced silver reflective strips wrap the full 360 degrees. It carries two external storage pockets and a breakaway zipper front. Certified to ANSI/ISEA107-2020, referencing the Type/Class P2 standard.
View reference →
WW-1037Segmented-Tape Safety Vest
Segmented multicolor reflective tape raises visual contrast, so the wearer reads clearly against mixed backgrounds. The body is lightweight, breathable 100% polyester. Four pockets are laid out across the front: a flap pocket on the right chest, a pen pocket on the left, and two lower flap pockets. Zip front; certified to ANSI/ISEA107.
View reference →
WW-1038Class 3 Five-Point Breakaway Vest
A Class 3 breakaway vest in lightweight 100% polyester with silver reflective tape, intended for workers who need the highest visibility level. A single chest pocket keeps the front uncluttered. Hook-and-loop closure; certified to ANSI/ISEA107-2020.
View reference →
WW-1039Class 3 Mesh Roadway Vest
Yellow and brown reflective strips meet Class 3 requirements and stay readable under different lighting conditions. The polyester mesh body lets air move freely, which helps in warm weather. Two storage pockets sit on the chest, and the front closes with hook-and-loop. Certified to ANSI/ISEA107-2020.
View reference →
WW-1040LED-Lit Mesh Surveyor Vest
A mesh surveyor vest with built-in LED lighting for night work: white LEDs at the front, red at the rear, switchable between solid, strobe, and slow-strobe patterns. Three 2-inch reflective tapes wrap the torso for 360-degree coverage. The 100% polyester mesh body carries four outside pockets plus internal tablet, standard, and battery-pack pockets. Zip front; certified to ANSI/ISEA107-2020.
View reference →
WW-1041Multi-Pocket Breakaway Safety Vest
A solid polyester vest with a breakaway zip front, built for crews that need storage as well as visibility. Two-inch reflective stripes pick up light in low-light conditions. Four pockets handle pens, tools and paperwork, including a flap pocket and an inside pocket. The source garment is certified to ANSI/ISEA 107-2020.
View reference →
WW-1042Four-Stripe Hi-Vis Zip Vest
Four two-inch reflective tapes run the full way around this zip-front vest, so it reads from every angle after dark. The 100% polyester body resists wrinkles and water. Certified to ANSI/ISEA 107-2020, it is a common pick for traffic control, event security and emergency crews.
View reference →
WW-1043Two-Tone Hook-and-Loop Safety Vest
Breathable 100% polyester keeps this hook-and-loop vest wearable in hot, high-output work. Two-tone reflective strips sit across the chest, shoulders and cuffs. Storage stays simple, with a pen pocket on the chest and two pockets at the hem.
View reference →
WW-1044Wide-Vent Mesh Safety Vest
Solid knit polyester with wide-vent mesh on select styles, so air moves through without giving up durability. Two-inch retro-reflective tape on the front and back gives strong contrast in poor light. A pocket holds small items on the job, and the front closes with hook-and-loop.
View reference →
WW-1045Large-Pocket Vest with ID Pouch
Made for roles where identification matters as much as visibility. Four two-inch black reflective strips wrap the full torso, and a transparent pouch on the front holds an ID card in plain view. Two large front pockets and dedicated pen and pencil slots carry the rest. The body is lightweight 100% polyester with a zip front.
View reference →
WW-1046Mesh Hi-Vis Zip Vest
A straightforward mesh vest in 100% polyester, light enough for all-day wear. Three two-inch reflective strips circle the body for visibility from any direction. A left chest pocket and a webbing loop take care of small gear, and the front closes with a zipper.
View reference →
WW-1047Two-Tone Mesh Safety Vest
Polyester mesh keeps this vest cool on long shifts. Four two-inch reflective tapes with bright contrast trim give it 360-degree visibility, and the hook-and-loop front opens fast even with gloves on. Certified to ANSI/ISEA 107.
View reference →
WW-1048Class 3 Mesh Safety Vest
A pocket-free Class 3 vest in fluorescent green polyester mesh. Two-inch silver reflective tape layered over contrasting fabric extends across the arms, torso, shoulders and back, meeting ANSI/ISEA 107 Class 3. With no pockets to snag, it wears cleanly over other layers in surveying, roadside and high-traffic work.
View reference →
WW-1049Orange Mesh Multi-Pocket Vest
Silky orange polyester mesh with a serious pocket layout: two expandable lower pockets with adjustable flaps, a four-way pen pocket on the left chest and two internal slip pockets. The wide reflective tape pairs a wide-angle retroreflective lens with a durable fabric backing. Zip front, machine washable in cold water.
View reference →
WW-1050Class 2 Four-Pocket Safety Vest
Built to a Class 2 spec, this fluorescent polyester vest carries two-inch silver reflective tape around the waist, chest, shoulders and back. Four front pockets include two large chest pockets with flap closures. The zip-front body is lightweight, breathable and machine washable.
View reference →
WW-1051Four-Pocket Mesh Hi-Vis Vest
Neon and silver reflective strips alternate across the shoulders and waist of this quick-drying polyester mesh vest. A transparent ID pocket sits on the left, a pen pocket on the right and two large flap pockets at the hem. The front closes with a zipper.
View reference →
WW-1052Mesh Multi-Pocket Safety Vest
A storage-focused mesh vest with three two-inch reflective strips, edged in fluorescent trim, wrapping the full body. Pockets include a phone pocket with a hook-and-loop flap, pen and pencil slots and two large flap pockets. The 100% polyester mesh keeps it light and breathable through a full shift.
View reference →
WW-1053Black-Stripe Mesh Safety Vest
Three black reflective strips give this mesh vest a subdued look that still reflects well after dark and hides stains on the job. The 100% polyester mesh body is light and breathable. A hook-and-loop front keeps it quick to put on and take off.
View reference →
WW-1054Padded-Collar Mesh Hi-Vis Vest
A padded collar sets this mesh vest apart on long shifts. Three two-inch reflective strips wrap the body for all-round visibility in low light, and the 100% polyester mesh stays breathable. On the front there is a left chest pocket, a webbing loop and a zip closure.
View reference →
WW-1055Gold-Stripe Utility Safety Vest
Gold reflective strips wrap this lightweight polyester vest for visibility from every direction. Two large utility pockets take tools and paperwork. The hook-and-loop front makes it quick to pull on over workwear, and the whole vest is machine washable.
View reference →
WW-1056Flap-Pocket Mesh Safety Vest
Three two-inch multicolor reflective strips circle this breathable polyester mesh vest. Three flap pockets and a pen pocket hold a phone, documents and writing tools. The zip front and S-5XL size run make it easy to issue across a crew.
View reference →
WW-1057Lightweight Mesh Tank Vest
Cut like a tank top in 100% polyester jersey mesh, this is a light two-tone hi-vis vest for warm conditions. The zip front keeps it simple to wear over a shirt or jacket. Certified to ANSI/ISEA 107 and sized S through 5XL.
View reference →
WW-1058Mesh Vest with ID Pocket
Three certified reflective tapes wrap this mesh vest a full 360 degrees. Document handling is built in: a transparent ID pocket on the right chest, a pen pocket on the left and two storage pockets at the hem. The 100% polyester mesh body stays light, and the front zips closed.
View reference →
WW-1059Four-Pocket Vest with Mic Tabs
Set up for crews on radios: dual microphone tabs sit on the upper chest of this quick-drying mesh vest. Three reflective strips, alternating neon and silver, cross the shoulders and waist for 360-degree coverage. Four pockets take a phone, pens, a flashlight and paperwork, and the front zips for easy on and off.
View reference →
WW-1060Adjustable Reflective Strap Harness
A strap-style reflective harness rather than a full vest. Four adjustable reflective straps give 360-degree reflectivity that reads from up to 300 meters, and the polyester mesh body stays airy against clothing. Hook-and-loop closure, certified to CSA Z96-15. Suited to night work and after-dark activity from cycling to dog walking.
View reference →
WW-1061Orange Mesh Surveyor Vest
A surveyor-style vest cut from orange polyester mesh, so air moves through the fabric during long shifts in hot conditions. Silver and yellow reflective strips run across the shoulders, torso and back for 360-degree coverage. The front closes with hook-and-loop. The source garment is certified to CSAZ96-15.
View reference →
WW-1062Multi-Pocket Hi-Vis Safety Vest
This vest pairs a lightweight polyester shell with a four-pocket layout: a flap pocket on the left chest for a phone or notebook, an open pocket on the right chest for quick tool access, and two large flap pockets below. High-brightness silver reflective tape covers the shoulders, torso and back. It closes with hook-and-loop and is certified to CSAZ96-15 in the source spec.
View reference →
WW-1063Black Multi-Pocket Reflective Vest
Built on a tear-resistant black polyester shell, this vest uses silver and yellow reflective strips that stand out against the dark background in low light. Storage follows the working layout: a flap pocket on the left chest, an open pocket on the right chest, and two large flap pockets at the waist. The front closes with hook-and-loop. Certified to CSAZ96-15 in the source spec.
View reference →
WW-1064Yellow Mesh X-Back Safety Vest
High-visibility yellow mesh keeps this vest wearable through long stretches of hot weather. Two-inch silver reflective strips wrap the full circumference, and the strips cross in an X pattern on the back so the wearer reads clearly from behind. Hook-and-loop closes the front. The source garment carries CSAZ96-15 certification.
View reference →
WW-1065Red Zip-Front Safety Vest
A red polyester vest with yellow reflective tape, aimed at crews who need to stand out in low light and heavy traffic. Multiple pockets carry tools and small items. A front zipper makes it quick to put on and take off. The source garment is certified to CSAZ96-15.
View reference →
WW-1066Wide-Stripe Waterproof Work Vest
This work vest is made from lightweight polyester with waterproof properties, so it holds up in rain and humid conditions. Broad silver reflective stripes bordered in yellow run across the front and back. Pockets along the lower edge hold tools and small items, and the front closes with hook-and-loop. Certified to CSAZ96-15 in the source spec.
View reference →
WW-1067Black Mesh Safety Vest
A black vest in 100% breathable mesh, light enough for all-day wear and machine washable. Two-inch silver reflective tape with padding runs along the waist, chest, shoulders and back for 360-degree coverage, made to CSAZ96-15 Class 2 spec per the source. The front closes with hook-and-loop.
View reference →
WW-1068Two-Tone Orange Safety Vest
Orange polyester forms the body of this vest, with 2-inch silver reflective tape set on contrasting yellow fabric that extends over the arms, torso, shoulders and back. The result is 360-degree coverage in low light. Storage includes large chest pockets plus additional utility pockets, and the front closes with hook-and-loop. Certified to CSAZ96-15 in the source spec.
View reference →
WW-1069Fluorescent Yellow Wide-Stripe Vest
Fluorescent yellow polyester gives this vest its base color, and the fabric is waterproof for rainy or humid conditions. Wide silver reflective strips edged in orange cover the front and back. Several large-capacity pockets hold tools and other items. The front closes with hook-and-loop, and the source garment is certified to CSAZ96-15.
View reference →
WW-1070Yellow Mesh Zip-Front Vest
Made from fluorescent yellow polyester mesh, this vest breathes well enough for long shifts in hot weather. Wide silver reflective strips handle low-light visibility. A zip front makes it fast to put on over other layers, and several practical pockets keep tools at hand. Certified to CSAZ96-15 in the source spec.
View reference →
WW-1071Yellow Zip-Front Reflective Vest
A yellow polyester vest with a simple reflective layout: two vertical bars and two horizontal bars placed along the waist, shoulders and back, compliant with CSAZ96-15 per the source. Polyester keeps the vest durable and resistant to deforming outdoors. The front closes with a zipper.
View reference →
WW-1072Four-Pocket Utility Safety Vest
This utility vest is cut from lightweight 100% polyester and carries three 2-inch reflective strips for 360-degree coverage. Four expandable pockets with flap closures hold larger tools and paperwork. The front closes with hook-and-loop, and the source garment is certified to CSAZ96-15.
View reference →
WW-1073Two-Tone Traffic Safety Vest
A traffic vest in breathable polyester with black edging that reinforces the borders. Silver reflective strips run both horizontally and vertically across the front and back. A transparent plastic pocket on the left chest displays an ID card without removing it. The zip front makes the vest quick to put on and take off. Certified to AS/NZS 1906 in the source spec.
View reference →
WW-1074Adjustable Buckle Reflective Vest
A minimal harness-style vest in fluorescent yellow fabric, fully adjustable so one garment fits over different layers and body types. Reflective material gives 360-degree visibility day or night. Plastic buckles close the vest and keep it secure without restricting movement. There are no pockets on this design. The source garment is certified to AS/NZS 1906.
View reference →
WW-1075Fluorescent Orange Zip Vest
Fluorescent orange polyester makes this vest easy to spot in any light. Wide reflective strips on the front and back cover day and night visibility. The garment is lightweight, and the zip front gives a secure fit that goes on and off quickly. Certified to AS/NZS 1906 in the source spec.
View reference →
WW-1076Yellow Zip Vest with ID Pocket
This vest combines breathable polyester with reinforced black edging for longer service life. Silver reflective strips are set horizontally and vertically on the front and back. A transparent plastic pocket on the left chest holds an ID card or site pass in view. The front zipper keeps the fit secure while staying easy to open. The source garment is certified to AS/NZS 1906.
View reference →
WW-1077Fluorescent Yellow Basic Vest
A no-pocket vest in fluorescent yellow fabric, suited to hot environments. Two horizontal and two vertical reflective strips cover low-light visibility on front and back. Hook-and-loop closes the front. Certified to AS/NZS 1906 in the source spec.
View reference →
WW-1078Two-Tone Yellow-Orange Vest
Fluorescent yellow and orange fabric panels form the body of this lightweight vest. Two horizontal and two vertical reflective strips on the front and back give 360-degree coverage in low light. The hook-and-loop front closes quickly over work clothing. There are no pockets on this design. The source garment is certified to AS/NZS 1906.
View reference →
WW-1079Red Reflective Work Vest
Durable red polyester keeps this vest light but robust through repeated use. Bright yellow reflective strips handle visibility in low light. Multiple pockets store tools and personal items, and the front zipper holds a secure fit during active work. Certified to AS/NZS 1906 in the source spec.
View reference →
WW-1080Hi-Vis Long-Sleeve Jacket
A long-sleeve high-visibility garment in breathable, lightweight polyester. The orange body carries grey reflective strips along the edges for visibility in low light and poor weather. Hook-and-loop closes the front and keeps the fit secure. The source garment is certified to AS/NZS 1906.
View reference →
WW-1081X-Back Mesh Hi-Vis Vest
An open-mesh vest for hot conditions, with silver reflective tape laid in an X across the back and a single horizontal strip across the front. The polyester mesh body is bound with black edging for durability. Side ties adjust the fit and keep the vest in place without restricting movement. Built for AS/NZS 1906 compliance.
View reference →
WW-1082Multi-Pocket Zip-Front Hi-Vis Vest
A working vest in 100% polyester with 2-inch retroreflective tape running the full way around the body for 360-degree coverage. Three pockets carry tools and paperwork: two large utility pockets and a flap pocket. A full zip front makes it quick to put on over other layers.
View reference →
WW-1083Basic Hi-Vis Vest, Hook-and-Loop
A plain high-visibility vest without reflective tape, intended for low-risk settings where the fluorescent fabric alone is enough: event stewarding, volunteer groups, recreational use. Breathable polyester with grey edge binding. The hook-and-loop front opens and closes in one motion, so it works well where vests are shared and swapped often. Certified to AS/NZS 1906.
View reference →
WW-1084Fluorescent Pink Hi-Vis Vest
Fluorescent pink is an option where crews want to stand apart from the usual yellow and orange on site. This polyester vest has wide reflective strips on the front and back for day and night visibility. It closes with a hook-and-loop front and weighs little enough to wear over any uniform.
View reference →
WW-1085Long-Sleeve Hi-Vis Vest with Chest Pocket
A long-sleeve high-visibility garment in fluorescent orange polyester. Two horizontal and two vertical reflective strips run across the front and back, so the wearer reads clearly from every angle in low light. There is a single chest pocket for small items and a zip front. Made to AS/NZS 1906 spec.
View reference →
WW-1086Fluorescent Orange Hi-Vis Vest, Zip Front
A sleeveless vest in fluorescent orange polyester, cut plain with no pockets. Reflective coverage comes from two horizontal and two vertical strips on both front and back. The zip front holds the vest closed and secure through a full shift.
View reference →
WW-1087Fluorescent Yellow Hi-Vis Vest, Hook-and-Loop
The fluorescent yellow counterpart in this vest range, with the same reflective layout: two horizontal and two vertical strips on the front and back. The fabric is lightweight and holds up to daily wear. A hook-and-loop front makes it fast to put on and take off between tasks. Built for AS/NZS 1906 compliance.
View reference →Request a quote for safety vests
Send the models, quantities, colours, branding and any standard you need. We return references and a quotation on your timeline.