Safety Accessories
Work and safety accessories produced to order: reflective bands, caps and small hi-vis items. Specification and branding are confirmed per programme.
WW-1197Hi-Vis Helmet Cover, Black Stripe
A fluorescent yellow helmet cover with reflective black stripes for day and night visibility. The shell is weather-resistant polyester, and an elastic band holds the cover in place, including in windy conditions. Certified to EN ISO 20471. One size fits most standard helmets.
View reference →
WW-1198Hi-Vis Balaclava
Fluorescent yellow balaclava with reflective silver stripes, made from weather-resistant polyester. An elastic band gives a snug fit that stays put in wind. The source garment is certified to EN ISO 20471 and is worn on construction sites, roadwork, and other outdoor jobs where visibility matters.
View reference →
WW-1199Cooling Headband
An evaporative cooling headband for heat stress management on hot job sites. It combines 100% polyester mesh with PVA material and carries an anti-microbial treatment against mold build-up and odor. Each activation lasts up to 5 hours depending on humidity. Available in 5 colors, one size fits all.
View reference →
WW-1200Hi-Vis Arm Sleeves
Pull-on arm sleeves in fluorescent yellow polyester with reflective silver stripes. Elastic bands keep them in position during work. Certified to EN ISO 20471, they add day and night visibility for crews on construction sites and roadwork.
View reference →
WW-1201Hi-Vis Mesh Gaiter
Lightweight mesh gaiter in fluorescent yellow-green with high-contrast reflective silver stripes. An adjustable hook-and-loop strap fits it over different gear and clothing. Certified to EN ISO 20471 for use on construction sites, road work, and emergency response scenes.
View reference →
WW-1202Hi-Vis Knit Beanie
Stretch-knit beanie in bright fluorescent polyester with reflective stripes for low-light work. The knit stretches to fit a range of head sizes without straps or hardware. EN ISO 20471 certified. Common on construction sites, road work, and emergency response duty in cold weather.
View reference →
WW-1203Two-Tone Hi-Vis Helmet Cover, Zip Fit
Two-tone helmet cover with a fluorescent yellow base, orange segments, and reflective stripes. An adjustable zip and elastic edges make it quick to fit and remove across helmet sizes. The lightweight polyester shell is certified to EN ISO 20471. Used by construction and road maintenance crews.
View reference →
WW-1204Hi-Vis Cap, Quick-Dry
Work cap in fluorescent yellow polyester with reflective accents. The fabric is lightweight, breathable, and quick-drying for long shifts outdoors. A hook-and-loop strap at the back adjusts the fit. Certified to EN ISO 20471 for construction and road safety crews.
View reference →
WW-1205Hi-Vis Beanie, Fluorescent Orange
Cold-weather beanie in fluorescent orange with reflective piping for daytime and low-light visibility. The polyester fabric is breathable, and a hook-and-loop strap at the back adjusts the fit across head sizes. Certified to EN ISO 20471. Worn by construction workers, traffic controllers, and emergency responders.
View reference →
WW-1206Hi-Vis Mesh Leg Gaiter
Leg gaiter in breathable mesh polyester, fluorescent yellow-green with reflective silver stripes. It fastens over clothing or gear with an adjustable hook-and-loop strap. Certified to EN ISO 20471 and used on construction sites, roadwork, and emergency response calls.
View reference →
WW-1207Hi-Vis Backpack Cover, Reflective Print
A fluorescent yellow cover that fits over a backpack to keep the wearer visible from behind. Reflective silver stripes work day and night, and the weather-resistant polyester shell stands up to outdoor use. An elastic band grips the pack, including in wind. Certified to EN ISO 20471.
View reference →
WW-1208Hi-Vis Bike Helmet Cover
Fluorescent yellow cover with reflective silver sections for visibility in daylight and darkness. The polyester fabric is weather-resistant, and an elastic band keeps the cover seated in windy conditions. Certified to EN ISO 20471. One size fits most.
View reference →
WW-1209Hi-Vis Safety Hat
Safety hat made from 100% polyester fibre, with a fluorescent yellow body and silver reflective strips. An adjustable closure keeps it from slipping off during work. Certified to EN ISO 20471. One size covers most head sizes, which simplifies stock for site teams on construction, road building, and traffic management jobs.
View reference →
WW-1210360 Reflective Helmet Cover
Helmet cover with a full 360-degree reflective design, visible from every angle in low light. The weather-resistant fabric handles outdoor conditions, and an elastic edge with adjustable drawstring secures it over different helmet sizes. Certified to EN ISO 20471. Suited to cyclists, motorcyclists, and outdoor workers on night shifts.
View reference →
WW-1211Hi-Vis Reflective Balaclava
Balaclava in fluorescent yellow polyester with reflective silver stripes for day and night work. The fabric is weather-resistant and the elastic band keeps the fit snug in wind. Certified to EN ISO 20471. Standard issue for construction and roadwork crews working near traffic.
View reference →
WW-1212Hi-Vis Backpack Cover, Mesh Base
Backpack cover in fluorescent yellow with reflective silver stripes, built from weather-resistant polyester. The elastic band fits it over a wide range of pack sizes and holds it in place in wind. Certified to EN ISO 20471 for site work, roadwork, and commuting on foot or by bike.
View reference →
WW-1213Hi-Vis Cap, Reflective Brim
Fluorescent yellow work cap with reflective strips on the brim and adjustment strap. The lightweight polyester fabric is breathable for long wear, and a hook-and-loop strap at the back sets the fit. Certified to EN ISO 20471. Used by construction workers and road maintenance crews.
View reference →
WW-1214Hi-Vis Zip Pouch
Utility pouch in fluorescent yellow polyester with reflective silver strips. A sturdy zip closure keeps contents secure while allowing quick access. Certified to EN ISO 20471, it suits crews on construction sites, roadwork, and emergency response who need small items visible and at hand.
View reference →
WW-1215Multi-Wear Neck Gaiter
A lightweight neck gaiter in 100% polyester jersey knit. It can be worn multiple ways as a climate shield for the neck and face. One size fits all.
View reference →
WW-1216Hi-Vis Helmet Cover, Silver Stripe
Helmet cover in fluorescent yellow with reflective silver stripes, sized to fit a wide range of helmets. The polyester shell is weather-resistant and an elastic band keeps it in place in wind. Certified to EN ISO 20471. Fitted by crews on construction sites, roadwork, and traffic management duties.
View reference →
WW-1217Hi-Vis Reflective Beanie
A hi-vis beanie in breathable polyester, fluorescent yellow-green with reflective silver stripes. An adjustable hook-and-loop strap keeps it seated over other headwear or clothing. The source garment is certified to EN ISO 20471. Common on construction sites, road works, and with emergency response crews.
View reference →
WW-1218Hard Hat Neck Shade
A mesh sun shade that fits under a hard hat brim with an elastic band and drapes over the neck and ears. Hi-vis binding runs along the edges and a reflective stripe sits at the hem. The open mesh keeps air moving in hot outdoor work. One size fits standard hard hats.
View reference →
WW-1219Orange Safety Cap, Reflective Piping
Work cap in fluorescent orange breathable polyester, trimmed with reflective piping for daytime and low-light visibility. The hook-and-loop strap at the back adjusts to most head sizes. The source cap is certified to EN ISO 20471. Worn by construction crews, traffic controllers, and emergency responders.
View reference →
WW-1220Hi-Vis Mesh Gaiters
Lightweight mesh gaiters in fluorescent yellow-green with reflective silver stripes. A hook-and-loop strap adjusts the fit over boots, trousers, or other gear. EN ISO 20471 certified in the source version. Typical settings are construction sites, road work, and emergency response.
View reference →
WW-1221Reflective Backpack Cover, Full Silver
An elasticated cover that turns a backpack into a hi-vis marker for cyclists, runners, and site workers. The fabric is weather-resistant polyester in fluorescent yellow with reflective silver stripes. The elastic band keeps it in place in windy conditions. Made to the EN ISO 20471 spec cited for the source item.
View reference →
WW-1222Hi-Vis Safety Hat, Drawstring
Made from 100% polyester fibre, this hat has a fluorescent yellow body with orange and silver reflective strips. An adjustable drawstring stops it slipping off during work. Certified to EN ISO 20471. Suits outdoor roles such as construction, road building, and traffic management.
View reference →
WW-1223Two-Tone Orange and Lime Cap
A work cap in lightweight, quick-drying polyester with an orange body, lime green accent band, and dark underbill to cut glare. The rear strap adjusts to most head sizes. The source cap meets EN ISO 20471. Wearers range from construction and road safety crews to emergency services.
View reference →
WW-1224Two-Tone Stripe Leg Gaiters
Leg gaiters in breathable fluorescent yellow-green polyester with high-contrast silver and orange reflective stripes. A hook-and-loop strap gives a secure fit over different boots and trouser widths. Meets EN ISO 20471 per the source listing. Used on construction sites, road works, and by emergency response teams.
View reference →
WW-1225Hi-Vis Reflective Backpack
A work backpack cut from durable polyester in fluorescent yellow-green, with reflective silver strips across the body. The padded shoulder strap adjusts for comfortable carrying. The source pack is certified to EN ISO 20471. Carried by construction workers, cyclists, and emergency responders.
View reference →
WW-1226Orange Microfiber Towel
Absorbent microfiber towel in bright orange, soft enough for skin and safe on delicate surfaces. The colour keeps it easy to spot during outdoor use. The source item is listed as meeting EN ISO 20471. Logo printing and embroidery make it a practical branded item for company fleets and crews.
View reference →
WW-1227Hi-Vis Seat Belt Cover
A slip-on cover that adds hi-vis marking to a seat belt, in fluorescent orange with reflective silver stripes. Weather-resistant polyester stands up to regular outdoor use, and an elastic band holds the cover in position. Certified to EN ISO 20471 in the source version.
View reference →
WW-1228Hi-Vis Helmet Cover, Reflective Stripes
Fluorescent yellow helmet cover with reflective silver stripes, made from weather-resistant polyester. The elasticated edge grips the helmet shell so the cover stays put in wind. Built for EN ISO 20471 compliance. Fits work in construction, roadwork, and traffic management.
View reference →
WW-1229Hi-Vis Insulated Fleece Hood
A cold-weather hood in warm, breathable polyester fleece, coloured fluorescent yellow for low-light visibility. The drawstring adjusts to different head sizes and keeps the hood in place during movement. Certified to EN ISO 20471 in the source version. Worn on winter construction and roadwork shifts and by emergency response crews.
View reference →
WW-1230Fabric Face Mask, Navy
A reusable fabric face mask in navy sport mesh with a contoured three-panel cut. Elastic ear loops hold it in place through a work shift. One size fits most.
View reference →
WW-1231PVA Cooling Towel
Evaporative PVA towel that activates with water and cools for up to four hours. Water absorption capacity is 1.428 L per square metre, with a cooling effect of roughly 10 to 15 degrees. The birdseye fabric wicks moisture. Supplied in blue, green, pink, and white at 40 x 60, for crews and athletes working in extreme heat.
View reference →
WW-1232Orange Safety Cap, Hook-and-Loop
Breathable polyester cap in vibrant orange with integrated reflective strips for daytime and low-light conditions. A rear hook-and-loop strap adjusts the fit to most head sizes. Complies with EN ISO 20471 per the source listing. Worn by construction workers, road safety personnel, and outdoor sports users.
View reference →
WW-1233Microfiber Cooling Towel
Cooling towel with absorbent microfiber ends that give a soft, clean section for wiping hands, face, or glasses. The birdseye body wicks moisture; water absorption is 0.362 per square metre and the cooling effect is about 5 to 10 degrees. Offered in blue, lime, and orange at 40 x 60. Intended for work and activity in hot weather.
View reference →
WW-1234Polyester Neck Gaiter
A lightweight neck gaiter in 100% polyester jersey knit. It works as a multi-wear climate shield and can be worn in several configurations. Supplied in one size that fits all.
View reference →
WW-1235Fluorescent Safety Cap, Reflective Piping
Fluorescent work cap trimmed with reflective piping, cut from breathable polyester. A hook-and-loop strap at the back adjusts to a range of head sizes. The source cap is certified to EN ISO 20471. Typical wearers include construction workers, traffic controllers, and emergency responders.
View reference →
WW-1236Hi-Vis Reflective Safety Gaiter
Reflective safety gaiter in lightweight, breathable mesh, fluorescent yellow-green with silver stripes for visibility in all lighting conditions. The hook-and-loop strap adjusts over different gear and clothing sizes. EN ISO 20471 certified in the source version. Fits construction, road work, and emergency response settings.
View reference →
WW-1237Hi-Vis Neck Gaiter
A fluorescent yellow neck gaiter in breathable polyester, built for EN ISO 20471 compliance. An elastic band keeps it in place through a full shift. One size covers most neck sizes. Common with construction crews, traffic controllers and emergency responders; it also works for cycling, jogging and hiking.
View reference →
WW-1238Fabric Face Mask, Fluorescent Yellow
Fluorescent yellow safety mask with reflective silver stripes for day and night visibility. The shell is weather-resistant polyester and an elastic band gives a snug fit that holds in wind. Made to an EN ISO 20471-certified source spec. Used on construction sites and roadwork, and by cyclists and runners.
View reference →
WW-1239Hi-Vis Reflective Safety Harness
A wear-over visibility harness in stretch elastic fabric, fluorescent green with reflective silver stripes. Adjustable buckles set the fit across different body types, and the design leaves room to attach extra gear. Built for EN ISO 20471 compliance. Road crews, construction workers and emergency responders use it, as do runners and cyclists out after dark.
View reference →
WW-1240Two-Tone Reflective Backpack Cover
This cover slips over a backpack to make the wearer visible from behind, day or night. Fluorescent yellow polyester with reflective silver sections, held on by an elastic band that stays put in wind. The fabric is weather resistant and the spec is built for EN ISO 20471 compliance. One size fits a wide range of backpacks.
View reference →
WW-1241Hi-Vis Mesh Leg Gaiters
Lightweight mesh leg gaiters in fluorescent yellow-green with high-contrast reflective silver stripes. An adjustable hook-and-loop strap fits over boots, trousers or other gear. Built for EN ISO 20471 compliance and sized to fit most wearers. Typical use is on construction sites, road work and emergency response.
View reference →
WW-1242Hi-Vis Reflective Seat Belt Cover
A seat belt cover in fluorescent yellow polyester with reflective silver stripes, made to an EN ISO 20471-certified source spec. The polyester is weather resistant and an elastic band holds the cover in place, even in wind. One size fits most. It suits construction and roadwork settings as well as cycling and running.
View reference →Request a quote for safety accessories
Send the models, quantities, colours, branding and any standard you need. We return references and a quotation on your timeline.